Working principle of XHB rotary pump:
XHB rotary pump is a rotating positive displacement pump that changes the working volume by the relative motion between the rotor and the pump body,thereby increasing the energy of the liquid.By relying on the contact between the rotor inside the pump and the liquid,energy is directly applied to the liquid in the form of static pressure on one side,and the liquid is expelled through the squeezing effect of the rotating rotor.At the same time,it flows out of the space on the other side,forming low pressure and allowing the liquid to be continuously sucked in.Having positive displacement properties,it can be applied to metering or situations where flow rate does not vary with back pressure.Suitable for various media,versatile and excellent.
Characteristics of XHB rotary piston pump:
◆It can transport materials with a viscosity of≤2 million CP and a solid content of 60%,with a wide flow range of 0.1-3000m3/h.
◆Good self-priming ability without the need for watering or auxiliary devices,with a large self-priming capacity of 9 meters.
Dual support stability,output pressure can reach 1.8Mpa,multi-stage pump can reach 3.0Mpa.
◆Non clogging and multiple rotor forms protect the high pass rate of different materials.The diameter of the large incompressible material passing through is 80mm.
Smooth conveying with minimal pulsation,capable of conveying mixed media of solid,liquid,and gas.
◆Three element flow precision mold and five axis linkage process,with high efficiency and low noise.
◆It can rotate forward and backward,especially suitable for loading and unloading situations.
Compact structure,few vulnerable parts,and low failure rate.
◆Online repair design,maintenance does not require dismantling of pipelines.
Low speed of 10-650r/min,slight wear,and equipped with stable axial and radial performance,mainly based on actual reports,with a relatively long operating life.
◆Insulation and cooling,along with Anran valves and other configurations,protect the process requirements for special working conditions.
◆Convenient control of flow rate by adjusting the speed,suitable for process requirements that require flow rate changes.
Suitable for conveying sensitive media such as liquid bombs and other special materials.
Widely applicable and highly suitable,pumps with special materials and rotor forms can meet different working conditions within the flow and pressure range.
