Six-blade pump head-Botou Zhuobo Machinery Factory

Drive mode: servo motor, variable frequency motor, fixed speed motor.

Scope of application: The six-blade pump head is suitable for medium, medium and low viscosity paste liquids, sauces, uniform and free of hard impurities. For example, honey, garlic chili sauce, detergent, chocolate, etc.

Sealing method: Teflon seal, Teflon seal group.

Mechanical seal, packing seal.

Material: 304, 316, 2205 duplex steel, 316L, CR12MOV

Product parameter table

MC-RP Series Cam Rotor Pump Series Parameters
Serial No.	Product number	Theoretical flow		high pressure	Rotating speed	Diameter	Motor power (KY)	Rotor Blades Classification	Universal rotor blades	Material (wet parts)	Remark
Serial No.	Product number	L/100r	m³/h	high pressure	Rotating speed	Diameter	Motor power (KY)	Rotor Blades Classification	Universal rotor blades	Material (wet parts)	Remark
1	CRP-2	2	1.2	0-0.6	10-1000	1/2internal threadDN15	0.55	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
2	CRP-3	3	1.8	0-0.6	10-1000	19(25-32)	0.55-1.1	1-12Inside	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
3	CRP-5	5	3	0-0.6	10-1000	25	0.75-1.5	1-12Inside	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
4	CRP-10	10	6	0-0.6	10-1000	32	0.75-1.5	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
5	CRP-20	20	9	0-0.6	10-750	38	1.5-2.2	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
6	CRP-35	35	15	0-0.6	10-750	51	2.2-4	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
7	CRP-60	60	18	0-0.6	10-500	63/DN65	3-7.5	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
8	CRP-80	80	24	0-0.7	10-500	63/76/DN65/DN80	4-11	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
9	CRP-120	120	35	0-1.2	10-500	89/80Flange	7.5-22	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
10	CRP-165	165	48	0-1.2	10-500	89/80Flange/DN100	7.5-22	1-12因	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
11	CRP-200	200	60	0-1.2	10-500	DN100/DN125	22-37	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
12	CRP-250	250	75	0-1.2	10-500	DN100/DNI25	22above	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
13	CRP-350	350	105	0-1.3	10-500	DN100/DNI25	22above	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
14	CRP-500	500	150	0-1.2	10-500	Flange optional	37above	1-12凶	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304
15	CRP-750	750	225	0-1.2	10-500	Flange optional	45above	1-12tooth	Butterfly 2 leaves, general 3 leaves	304/316L	The default material of the 3-leaf flow component is 304

Note: The flow range in the product parameters refers to the test data of the conveying medium "water".

The flow rate of the equipment is related to factors such as volumetric efficiency, viscosity of the conveying medium, temperature, and working pressure. The above parameters are for reference only. Please contact customer service for specific selection.

	TELEPHONE +86-13932728213
	Email：btszbjxc@126.com
	Phone：+86-13932728213
	Add：Botou Industrial Development Zone, Hebei Province