The main function of a filling machine is to fill and package beverages. Different types of equipment will be used for filling different beverages. Before dismantling the equipment, we still need to do a good job of inspection. Let's talk about the inspection content of the opening of the filling machine.
After the filling machine is opened, the main body, components, and accessories that cannot be installed immediately should pay attention to their storage location and precautions. According to the type of structure, material properties, characteristics of the parts, surface smoothness, etc. Storage time and meteorological conditions should also be considered, and the storage site should be free of dust, silt, and corrosive gases. When it deteriorates, reapply protective grease. When placing equipment, use square wood or other gaskets to firmly protect the ground height to prevent rusting, deformation, and dampness of the body. For fragile and fragile items, try to use the original packaging box as much as possible during storage.
Choose a favorable location for unboxing. Try to choose a location close to the installation site and inspect the surrounding environment to prevent damage to equipment and personnel in the surrounding liquid pipeline field when the box board falls off. When unpacking, nail pullers and pry bars are commonly used. For parts, it is strictly prohibited to use a sledgehammer to strike the box board to avoid affecting the accuracy of the body and parts. For the protective packaging and items of the filling machine, except for important components that need to be inspected, it is not allowed to remove and clean the packaging and protective substances too early. When the equipment requires small-scale operation of rotating and sliding components, it is necessary to clean the packaging, clean and protect the grease, apply paint and grease according to technical requirements, and then rotate or slide for inspection.
Filling machine unboxing inspection
1. The equipment name, serial number, specifications, manufacturer's name, packing list number, and number of received items should be truthfully filled in.
2. Check if the filled packaging is intact; Whether the documents are diverse; Are the spare parts diverse. Appearance refers to whether the appearance of the equipment is good or not; Whether the test results meet the requirements.
3. Inspection results: Missing parts and damage should be filled in.
4. Conclusion: It is necessary to fill in whether the design requirements and usage requirements are met, as well as the measures to be taken, based on the actual situation of the inspection.
