The YCB series circular arc gear pump is suitable for conveying lubricating oil or other liquids with properties similar to lubricating oil that do not contain solid particles and fibers, are non corrosive, have a temperature not higher than 80 ℃, and a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt).
● Application scope
Can be used as a transmission and booster pump in oil transportation systems;
A fuel pump that can be used for delivery, pressurization, and injection in the fuel system;
Can be used as a hydraulic pump to provide hydraulic power in hydraulic transmission systems;
It can be used as a lubricating oil pump in various industrial industries;
● Structural characteristics
The circular arc gear pump adopts a point continuous contact gear, which is composed of double circular arcs and sine curves to form a tooth profile, which can eliminate the involute gear conveying pump. The circular arc gear pump has a continuous contact point between the two meshing tooth profiles, which does not cause oil entrapment and solves the problems of vibration, noise, and increased bearing load caused by oil entrapment in involute gear pumps. Therefore, the circular arc gear pump has strong performance, low noise, and good energy-saving effect. This series of gear pumps mainly consists of gears, shafts, pump bodies, pump covers, bearing sleeves, shaft end seals, etc. The gear is manufactured with a double arc sine curve tooth profile. Compared with involute gears, there is no sliding of the tooth profile during the gear meshing process, so there is no wear on the tooth surface, smooth operation, no trapped liquid phenomenon, low noise, long service life, and good efficiency. This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new industry in design, production, and use
This series of circular arc gear pumps mainly consists of gears, shafts, pump bodies, Anran valves, and shaft end seals. Gears have high hardness and strength after heat treatment, and are installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved through the use of the output medium during pump operation.
There are oil drain and return grooves inside the pump, which means that the gears bear less torque force during operation, resulting in lower bearing load, less wear, and better pump efficiency.
The pump is equipped with an Anran valve as overload protection. The full reflux pressure of the Anran valve is 1.5 times the rated discharge pressure of the pump, and can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this Anran valve cannot be used as a pressure reducing valve for long-term operation. If necessary, it can be installed separately on the pipeline.
From the extended end of the spindle towards the pump, it rotates clockwise.
| model | flow/Q | speed/n
r/min | Discharge pressure/p
Mpa | Adhere to the contract for cavitation allowance /r m | efficiency/η
% | motor |
| m3/h | frequency/Hz | power/KW | model |
| YCB0.6-0.6 | 0.6 | 910 | 0.6 | 5.5 | 32 | 50 | 0.75 | Y90S-6 |
| 1.0 | 1390 | 50 | 0.75 | Y80L2-4 |
| 0.7 | 1130 | 60 | 0.75 | Y90S-6 |
| 1.2 | 1710 | 60 | 0.75 | Y80L2-4 |
| YCB0.6-1.6 | 0.6 | 910 | 1.6 | 7.0 | 70 | 50 | 1.1 | Y90L-6 |
| 1.0 | 1400 | 50 | 1.5 | Y90L-4 |
| 0.7 | 1130 | 60 | 1.1 | Y90L-6 |
| 1.2 | 1710 | 60 | 1.1 | Y90S-4 |
| YCB1.6-0.6 | 1.6 | 910 | 0.6 | 5.5 | 42 | 50 | 0.75 | Y90S-6 |
| 2.5 | 1400 | 50 | 1.1 | Y90S-4 |
| 1.9 | 1130 | 60 | 1.1 | Y90L-6 |
| 3.0 | 1710 | 60 | 1.5 | Y90L-4 |
| YCB1.6-1.6 | 1.6 | 940 | 1.6 | 7.0 | 71 | 50 | 2.2 | Y112M-6 |
| 2.5 | 1440 | 50 | 4 | Y112M-4 |
| 1.9 | 1150 | 60 | 2.2 | Y112M-6 |
| 3.0 | 1750 | 60 | 4 | Y112M-4 |
| YCB3.3-0.6 | 3.3 | 940 | 0.6 | 5.0 | 60 | 50 | 1.5 | Y100L-6 |
| 5.0 | 1420 | 50 | 2.2 | Y100L1-4 |
| 4.0 | 1150 | 60 | 1.5 | Y100L-6 |
| 6.0 | 1730 | 60 | 2.2 | Y100L1-4 |
| YCB3.3-1.6 | 3.3 | 960 | 1.6 | 7.0 | 72 | 50 | 5.5 | Y132M2-6 |
| 5.0 | 1440 | 50 | 7.5 | Y132M-4 |
| 4.0 | 1170 | 60 | 4 | Y132M1-6 |
| 6.0 | 1750 | 60 | 7.5 | Y132M-4 |
| YCB4-0.6 | 4.0 | 940 | 0.6 | 5.0 | 60 | 50 | 1.5 | Y100L-6 |
| 6.0 | 1420 | 50 | 2.2 | Y100L1-4 |
| 4.8 | 1150 | 60 | 2.2 | Y112M-6 |
| 7.2 | 1730 | 60 | 3 | Y100L2-4 |
| YCB4-1.6 | 4.0 | 960 | 1.6 | 7.0 | 72 | 50 | 5.5 | Y132M2-6 |
| 6.0 | 1440 | 50 | 7.5 | Y132M-4 |
| 4.8 | 1170 | 60 | 5.5 | Y132M-6 |
| 7.2 | 1750 | 60 | 7.5 | Y132M-4 |
| YCB8-0.6 | 8.0 | 960 | 0.6 | 5.0 | 61 | 50 | 3 | Y132S-6 |
| 12.0 | 1440 | 50 | 5.5 | Y132S-4 |
| 9.6 | 1170 | 60 | 4 | Y132M1-6 |
| 14.4 | 1750 | 60 | 5.5 | Y132S-4 |
| YCB8-1.6 | 8.0 | 970 | 1.6 | 7.0 | 75 | 50 | 11 | Y160L-6 |
| 12.0 | 1460 | 50 | 15 | Y160L-4 |
| 9.6 | 1170 | 60 | 11 | Y160L-6 |
| 14.4 | 1760 | 60 | 15 | Y160L-4 |
| YCB10-0.6 | 10.0 | 960 | 0.6 | 5.0 | 62 | 50 | 4 | Y132M1-6 |
| 15.0 | 1440 | 50 | 5.5 | Y132S-4 |
| 12.0 | 1170 | 60 | 5.5 | Y132M2-6 |
| 18.0 | 1750 | 60 | 7.5 | Y132M-4 |
| YCB10-1.6 | 10.0 | 970 | 1.6 | 7.0 | 76 | 50 | 11 | Y160L-6 |
| 15.0 | 1470 | 50 | 15 | Y160L-4 |
| 12.0 | 1170 | 60 | 11 | Y160L-6 |
| 18.0 | 1770 | 60 | 18.5 | Y160L-4 |
| YCB20-0.6 | 20.0 | 970 | 0.6 | 5.0 | 68 | 50 | 7.5 | Y160M-6 |
| 24.0 | 1170 | 60 | 7.5 | Y160M-6 |
| YCB25-0.6 | 25.0 | 970 | 0.6 | 5.5 | 69 | 50 | 11 | Y160L-6 |
| 30.0 | 1170 | 60 | 11 | Y160L-6 |
| YCB30-0.6 | 30.0 | 970 | 0.6 | 5.5 | 70 | 50 | 11 | Y160L-6 |
| 36.0 | 1170 | 60 | 11 | Y160L-6 |
| YCB40-0.6 | 40.0 | 970 | 0.6 | 5.5 | 72 | 50 | 15 | Y180L-6 |
| 48.0 | 1180 | 60 | 15 | Y180L-6 |
| YCB50-0.6 | 50.0 | 970 | 0.6 | 5.5 | 72 | 50 | 22 | Y200L2-6 |
| 60.0 | 1180 | 60 | 22 | Y200L2-6 |
