KCB Series Gear Oil Pump

The KCB series gear oil pump is suitable for conveying lubricating oil or other liquids with properties similar to lubricating oil, which does not contain solid particles and fibers, is non corrosive, has a temperature not exceeding 80 ℃, and a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt).

● Application scope

Can be used as a transmission and booster pump in oil transportation systems;

Can be used as a fuel pump for delivery, pressurization, and injection in the fuel system;

A hydraulic pump that can be used to provide hydraulic power in hydraulic transmission systems;

It can be used as a lubricating oil pump in various industrial industries;

● Structural characteristics

This series of gear oil pumps mainly consists of gears, shafts, pump bodies, safety valves, and shaft end seals. The gear has high hardness and strength after heat treatment, and is installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved using the output medium during pump operation.

There are customized oil discharge and return grooves inside the pump, which reduce the torque force borne by the gears during operation, resulting in low bearing load, low wear, and good pump efficiency.

The pump is equipped with an Enron valve as overload protection. The total reflux pressure of the Enron valve is 1.5 times the rated discharge pressure of the pump, and can also be adjusted according to actual needs within the allowable discharge pressure range. However, it should be noted that this Enron valve cannot be used as a pressure reducing valve for long-term operation. If necessary, it can be installed separately on the pipeline.

From the extended end of the spindle towards the pump, it rotates clockwise.

performance parameter