Submerged gear pump
Submerged gear pump, also known as bucket type submerged internal gear pump, is a new type of positive displacement pump developed based on the needs of submerged gear pumps in industries such as petroleum, chemical, coatings, oils, pharmaceuticals, dyes, and food. Due to the availability of different materials and unique structures, submerged gear pumps are widely used for conveying media with different properties and viscosities. The pump mainly consists of inner and outer rotors, shaft, pump body, front cover, bracket, seal, bearings, etc. There are three forms of seals: mechanical seal, packing seal, and magnetic transmission. For media with high temperature, high viscosity, and strong corrosiveness, packing seal is selected.
Plug in bucket is mainly used for conveying materials in turnover buckets, underwater tanks, etc. Insert directly into the bottom of the bucket without the hassle of emptying and refilling the first time. Don't worry about the suction problem caused by the high viscosity of the material.
When conveying materials that are prone to crystallization, insulation jackets can be designed on the front cover and pump body, which are melted by steam insulation during operation.
Introduction to the application scope of submerged gear pump - bucket type internal gear pump:
1. Food and beverage categories: dairy products, latex, chocolate, syrup, cheese, malt extract, beer
2. Fruit concentrates: Pudding, jam, jelly, tomato sauce
3. Pastry products: fats and oils, etc
4. Cosmetics: face cream, detergent, hair gel, perfume oil, etc
5. Oils: crude oil, heavy oil, and finished oil, etc
6. Chemical industry: dyes, fats, solvents, resins, and polymers
● Product advantages:
(1) Smooth liquid transportation, no pulsation, low vibration, and low noise.
(2) Has strong self-priming performance.
(3) Correctly selecting component materials can transport a variety of corrosive media, and the operating temperature can reach 200 ℃.
(4) The inner and outer rotors have the same direction of rotation, with minimal wear and a long service life.
(5) The speed of the pump is linearly related to the flow rate, and the speed can be adjusted appropriately to change the flow rate of the pump.
(6) Especially suitable for conveying high viscosity media.
One working principle
The LHSCJ type magnetic stirrer is mainly composed of internal magnetic steel, external magnetic steel, isolation sleeve, and transmission motor components. Excellent performance, reasonable structure, small size, and reliable use. Suitable for various stainless steel reaction tanks and mixing tanks in industries such as pharmaceuticals, chemicals, biotechnology, and food
The contact material part of the LHSCJ sanitary magnetic stirrer is made of 316L/304 material, and the stirring shaft is driven to operate through the working principle of a permanent magnet coupling. Replacing dynamic mechanical seals with welded isolation sleeves for static dead seals completely solves the unavoidable problems of running, emitting, and dripping in mechanical seals.
Technical parameters:
Working temperature: -30-200
Material: 304 or 316L
Work pressure: -0.1-1.6Mpa (optional)
