On October 18th, Mr. Nazya Mohammad Asad Al Jabali, a Jordanian customer, visited the company's twin-screw conveying pump and servo twin-screw pump filling machine for technical exchange. The customer requested servo twin-screw pump filling machines with diameters of 32, 38, 48, and 60, which can replace cam rotor pumps;
The movement direction of the twin-screw conveying pump is the same as the flow direction of the material, so there is no physical or chemical damage or agitation to the material;
Twin screw conveying pumps do not compress, shear, or damage materials; Can transport complete granular materials
Twin screw conveying pumps can rotate at high speeds, up to 3800 revolutions per minute, so ordinary motors can be used instead of reduction motors;
Twin screw conveying pumps can replace screw pumps;
The twin-screw conveying pump has only one synchronous rotor and no rubber or other stator structure in contact with it,
The twin-screw conveying pump has no metal to metal contact, so there is no wear during operation and there is no need to regularly replace the rotor shaft.
The reliable dynamic rotating surface sealing structure of the twin-screw conveying pump ensures the formation of a highly stable vacuum environment inside the pump chamber,
Twin screw conveying pumps can replace self-priming pumps for CIP cleaning and CIP return liquid conveying. Even in the presence of gas, there will be no water hammer effect, and the equipment can work normally. Replace centrifugal pumps, especially high-pressure centrifugal pumps;
The twin-screw conveying pump can not only stably output high pressure, which can reach. 6Mpa under normal conditions, but also work normally even in working environments with particles, gases, and unstable flow rates.
Characteristics and functional features
The pressure and flow range are large. The pressure is about 6-16 bar, and the flow rate can reach 200 T/H;
■ Wide range of liquid types and viscosities for transportation: capable of transporting fluids of various viscosities;
The inertia force of rotating components is relatively low, so higher speeds can be used, up to 3900r/min;
■ Strong inhalation and self-priming ability;
■ Uniform and continuous flow, minimal pulsation, low vibration, and low noise; Not sensitive to incoming gases and particles, capable of transporting actual main liquids and solid-liquid mixtures;
Simple structure, easy to install and maintain.
