Welcome to Botou Zhuobo Machinery Factory
contact
Contact us contact
Contact Form
  •  看不清?点击更换
RETURN
POSITION:Home > News > Company dynamics >

Maintenance method for oil unloading and sweeping station of cam rotor pump application

Publication time:2024-09-04

01. Usage

Firstly, proper use of equipment is a method of maintaining it, which is also applicable to cam rotor pumps. Therefore, if users want to do a good job of maintenance, the first thing is to understand the correct usage method: users need to have a comprehensive understanding of it, and operators need to read the equipment's user manual carefully to ensure the use of the correct operating method.

02. Correct maintenance methods

After the user completes the oil unloading and sweeping work of the cam rotor pump, they need to check the joints of its various lines and pipelines. If loose joints are found, they should be tightened properly. After checking the tightness of the equipment's wiring and pipelines, it is also necessary to inspect the parts of the equipment that require lubrication. If any abnormal situation is found during use, it is necessary to stop the equipment operation in a timely manner.

03. Characteristics of cam rotor pump

In the later stage of oil unloading and sweeping process, there may be mixed transportation of gas and liquid, and the mechanical seal of ordinary centrifugal pumps is prone to burning out, resulting in increased overall operating costs. At the same time, the self-priming capacity cannot meet the process requirements. Cam rotor pumps can solve these problems.

① Mechanical seal separate isolation chamber, lubrication and cooling, high safety

② The impeller is made of fully wrapped rubber material, which is corrosion-resistant and has strong self-priming ability throughout the pump

③ High pump efficiency, low noise, and minimal vibration

④ Real online maintenance, no need to remove pipelines, does not affect the operation of other equipment

⑤ The price of accessories accounts for 15% -20% of the entire pump, with a long replacement cycle, a long service life of the entire pump, and low comprehensive usage cost

Recommended pump types

Customer: A storage and transportation workshop of PetroChina

Pump type: RDC35

Flow rate: 30-40m ³/h

Pressure: inlet 0.5bar, outlet 5bar

Power: 11kw explosion-proof motor