The RY series thermal oil centrifugal pump is an ideal circulating pump for transporting corrosive high-temperature liquids without solid particles. It is widely used in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, and food. RY thermal oil pump is safe to use, reliable in performance, stable in operation, long in service life, and leak free in hot state. They also do not require an additional cooling system.
1. RY high-temperature oil pump is a positive displacement pump with the characteristics of simple structure, smooth operation, low pressure pulsation, stable flow rate, and low noise. It is usually used for transporting heavy oil and asphalt, and can also be used in oil fields, asphalt depots, thermal oil steam heating systems, etc.
2. The second-generation product RY type heat transfer oil pump is developed based on the digestion and absorption of foreign oil pumps. The basic structure is a single-stage single suction cantilever foot support structure. The pump's suction port is axial, and the discharge port is vertically upward from the center, installed on the base together with the motor.
3. The support structure of RY heat transfer oil pump is supported by double end ball bearings, with grease lubrication at the rear end and lubricating oil at the front end. There is an oil pipe in the middle, which can observe the sealing condition and the recovery of heat transfer oil at any time.
4. Adopting a self heating heat dissipation structure, changing the traditional water cooling structure, it is more concise, compact, energy-saving, efficient and reliable.
5. By adopting a self heating heat dissipation structure, the traditional water cooling structure has been changed, making it more concise, compact, energy-saving, high-performance, and reliable.
6. Using mechanical seal combined with packing seal, the mechanical seal is made of hard alloy material, with high mechanical strength and strong wear resistance, ensuring sealing performance in high temperature environments; The packing seal adopts high-temperature resistant packing with good thermal adaptability. RY
The series of heat transfer oil pumps can transport heavy oil/asphalt and other media that do not contain solid particles (although there may be light micro particles), meeting the requirements of solidification at room temperature, as well as outdoor installation in high-altitude areas where insulation is needed during the process. If you are interested in RY thermal oil pump, you can contact our staff to recommend the most suitable product for you based on your production situation!