The crescent cover, pump housing, and bracket of the NYP series gear pump can all be equipped with insulation sleeves, and the location that needs insulation can be selected according to actual needs. The jacket is cast as a whole, with good insulation effect, which can avoid various problems caused by welding the jacket. When heating is required: insulation can be achieved by introducing various heat media such as hot steam and thermal oil into the jacket cavity. When cooling is required: Various cooling liquids can be used to maintain the constant temperature of the pump body.
The NYP high viscosity insulation pump has the following advantages:
1. Sealing maintenance, replacement, and upgrade are convenient, and the bearing part is an integral component. Simply unscrew the top screw to unscrew the entire sealing chamber.
2. The gear tail clearance can be adjusted conveniently: NYP high viscosity pump can meet the process requirements of the pump at different viscosities by adjusting the gear clearance according to the viscosity needs. When adjusting, simply rotate the bearing box to achieve clearance adjustment, and the operation is simple.
3. Easy to adjust and replace packing: The wide bracket cavity of this pump model allows for easy adjustment and replacement of packing without the need to disassemble the pump.
4. Some important components can be replaced with various high-temperature resistant, wear-resistant, corrosion-resistant, high-pressure resistant, and self-lubricating materials according to process needs.
5. The insulation jacket is cast as a whole, with good insulation effect and zero leakage. The NYP series pumps produced by our company are widely used in various fluid transportation industries, especially for fluid transportation with large viscosity changes and a wide range. Can be used to transport pure and viscous fluids, and can be used to transport oil products such as lubricants, crude oil, etc; It can also be used to transport high viscosity materials without particulate impurities, such as rubber, asphalt, paint, adhesives, dyes, coatings, lubricants, polyols, food, pharmaceuticals, etc.