All parts in contact with the conveyed material in this pump are made of stainless steel materials that meet hygiene standards, and their seals are made of non-toxic rubber. Reliable rust prevention and non-toxic sealing ensure safety and hygiene.
The streamlined structure of the rotor and the absence of dead points and non-metallic components in the rotor chamber prevent contamination of the transported material.
Suitable for on-site CIP cleaning and steam disinfection.
It is especially suitable for conveying foam and medium with high viscosity, concentration and any particle in the conveying process. The conveyed materials will keep their original quality unchanged without any physical and chemical reaction.
Adopting external dynamic and static ring mechanical seals, it can be directly rinsed with water, resistant to high pressure, not easily worn, and has no leakage.
Small size, high flow rate, high head and pressure, suitable for long-distance and high resistance quantitative transportation.
The impeller of the pump is separated from the transmission gear, and a certain gap is ensured between the various components in the pump chamber, without contact, wear, low noise, good reliability, long service life, and energy saving and consumption reduction.
After configuring the frequency converter, the flow rate can be adjusted freely and it can be used as a general metering pump.
It can transport three-phase mixed materials such as steam, liquid, and solid. The viscosity of the medium that can be transported can be as high as 1000000CP and the slurry with a solid content of 55%.
Compact structure, easy maintenance, almost no vulnerable parts, and low operating costs.
It is especially suitable for conveying foam and media with high viscosity, concentration and safety particles. The conveyed materials will keep their original quality unchanged without any physical and chemical reaction. The conveying flow can be accurately controlled and can be used as a metering pump
Drive form: motor+continuously variable transmission
Main features: high speed regulation accuracy, wide speed range (speed ratio can be changed freely between 1:1.4-1:7), continuous operation, smooth operation, stable performance, low noise, high torque, and stepless flow rate adjustment. But its speed change needs to be manually adjusted, and the degree of automation is not high. The speed control must be carried out during operation, and the speed control handwheel should be turned when it cannot be stopped. It is not suitable for use in situations where overload or blockage may occur. Motor+fixed ratio reducer
Main features: strong load-bearing capacity, high efficiency, low vibration, low noise, low energy consumption, simple transmission mode, but due to its constant speed ratio, the flow rate cannot be adjusted. Variable frequency motor+frequency converter
Main features: high torque, high speed regulation accuracy, smooth operation, stable performance, automatic speed adjustment, ensuring arbitrary flow control, and compensating for the low degree of automation of continuously variable transmissions. The disadvantage is that the price of the frequency converter is relatively high.
