The adjustment method for gear oil pump failure mainly includes the following steps:
Check the oil level: Ensure that the oil level is at the appropriate height, and if the oil level is too low, add the required engine oil in a timely manner. At the same time, choose the correct grade of engine oil according to seasonal changes, such as using high-grade engine oil in summer and low-grade engine oil in winter. twelve
Clean the oil filter and pipeline: Regularly clean the oil filter and pipeline to ensure that the added oil must be filtered to ensure the cleanliness of the oil and prevent blockage of the oil filter or suction pipe.
Check the sealing of the oil suction port: Check whether the sealing ring of the oil suction port joint is damaged or missing, whether the oil suction pipeline is leaking, and whether the self tightening oil seal is damaged. If damage is found, sealing measures should be taken promptly or new sealing parts should be replaced.
Check the motor direction and pump installation position: Ensure that the motor direction is correct and consistent with the direction indicated on the pump. Check if the installation position of the pump meets the requirements, especially the height between the pump and the oil tank and the distance between the pipeline length, to avoid affecting the oil suction effect. seventy-eight
Check the oil suction pipeline: Ensure that the oil suction pipeline is unobstructed, not too thin or too thick, and has the same diameter as the suction chamber of the gear pump to avoid poor oil suction. eighty-nine
If the gear oil pump still cannot supply oil normally after the above steps are checked, it is recommended to seek the help of professional technicians. Incorrect operation may cause greater damage. During the maintenance process, it is important to pay attention to safety and avoid accidents
