What is the operating process of the filling machine
The operation process of the filling machine mainly includes the following steps:
Preparation before starting up:
Ensure that operators understand the structure, performance, and working principle of the filling machine and receive relevant training.
Wear appropriate personal protective equipment, such as work clothes, masks, gloves, etc.
Check if the materials and tools required for the filling machine are complete, such as filling materials, cleaning agents, lubricants, etc.
Check if all parts of the filling machine are functioning properly, such as the conveyor belt, conveyor mechanism, control system, etc.
Cleaning and inspection before startup:
Clean the conveyor belt and workbench to ensure there are no foreign objects or stains.
Check if the power, air, and lubrication systems of the filling machine are functioning properly.
Check if the sensors, control buttons, etc. are working properly.
Check if the parameters of the filling machine are set correctly.
Power on operation process:
Start the main power supply and follow the startup program on the operation panel.
Check if all parts are functioning properly, such as conveyor belts, filling heads, screw conveyors, etc.
Confirm whether the filling materials meet the requirements, such as capacity, quality, etc.
Set according to the required filling volume and speed.
After the filling machine reaches its normal working state, the product is sent to the area where it is ready to be packed.
Operating precautions:
Operators are strictly prohibited from touching the rotating parts and moving chains of the filling machine to prevent injury.
Operators are not allowed to make any adjustments or repairs to the filling machine during normal operation.
Regularly clean and maintain the filling machine to maintain its normal operation.
If any malfunction or abnormality is found in the filling machine, the power should be turned off in a timely manner and maintenance personnel should be contacted.
It is strictly prohibited to pile up debris around the filling machine and maintain a clean working environment.
Shutdown and cleaning operations:
Turn off the main power and follow the shutdown procedure on the operation panel.
Clean up residues and debris from the filling machine, including conveyor belts, filling heads, screw conveyors, etc.
Perform routine cleaning and maintenance work on the filling machine, including cleaning the casing, lubricating the chain, and bearings.
After cleaning, turn off the lubrication system and disconnect power 12.
